Brad Nail vs Finish Nail

In carpentry finishing and joining of a product can be done using either bard or finish nails. A bard nail is smaller in inches as compared to the finish nail. Brad nails are used mainly by amateurs, not professional carpenters because they are much easier to measure and apply. They can be applied using the air compressed guns; however, this must be done with a caution. When preparing joints, or holding pieces together, brad nails are most ideal. They are small and general do not distort the outlook of the joint and can therefore be used to hold the joint together as the glue sets. Once the joint is completely set, the nails can easily be removed.

Brad Nail vs Finish Nail

The hard wood requires a stronger nails that is much longer, and therefore the finish nail is often considered much better. The finish nail, is not only stronger and much longer, it is able to go through the hardwood without bending or requiring much force. The brad nail on the other hand is exemplary in the softwood where damage on the wood could be easy if force is used. For plywood and other soft material, the bard nail is most ideal as it causes the least damage.

When building small chairs, stools and other small items for the house, brad nails are found to be most ideal, as they ensure the finishing is quality and clear. On the other hand wardrobes, dressers and large dining tables or work areas require stronger joints, and as such the finish nail is found to be best.

Brad Nail vs Finish Nail
When confusion arises on brad nail vs. finish nail use, the advice of a professional carpenter can be sought. There is a lot of information available from online and other sources on the different uses and scenarios where both nails work best. The general features of the nails distinguish them and make them ideal for different projects.

Leave a Comment

three + fifteen =